CarbonNeeti

Free tool

CBAM embedded emissions worksheet

Work out the specific embedded emissions (SEE) of one CBAM good from your installation's direct emissions, electricity and precursors, by the EU's definitive-period method. Then estimate its CBAM cost. No sign-up.

Type at least 2 characters: a CN code, like 7208, or a word, like aluminium.

The period's total for this good's process, from your monitoring plan.

Electricity used in the process

0 or empty if none.

Precursors (CBAM goods used to make this one)

Only the relevant precursors of your production route count (Implementing Regulation (EU) 2025/2547, Annex II). The worksheet does not check relevance.

None added. A simple good has none.

How it works

  • SEE direct = attributed direct emissions / tonnes produced + the sum of each precursor's tonnes per tonne x its SEE direct (Implementing Regulation (EU) 2025/2547, Annex III B, Equations 59 to 62).
  • SEE indirect = electricity in MWh x the emission factor / tonnes produced + each precursor's indirect part where it counts.
  • A precursor from the EU or an exempt country counts at zero. An Annex II precursor (iron, steel, aluminium, hydrogen) never adds its indirect emissions.
  • A precursor at its EU default value carries the year's mark-up (Implementing Regulation (EU) 2025/2621, as replaced by 2026/1740).
  • SEE is rounded to 5 decimals, the precision the method sets.

The worksheet runs on the same code as CarbonNeeti's CBAM screen. One difference: the worksheet adds the mark-up to a precursor entered at its EU default value; the product's screen does not yet. It is an estimate for professional review: your EU buyer can declare actual emissions only after a verifier accredited under the EU CBAM rules has checked them.

The method step by step, with a worked example: read the guide.

Questions

What are specific embedded emissions (SEE)?

The tonnes of CO2e embedded in one tonne of a CBAM good: the installation's direct emissions attributed to the good, the indirect emissions from the electricity it used, and the embedded emissions of the precursors that went into it, each per tonne of output. The EU method is in Implementing Regulation (EU) 2025/2547.

Which emissions count for the CBAM cost?

For iron and steel, aluminium and hydrogen only direct emissions count. For cement and fertilisers, direct and indirect emissions both count (Regulation (EU) 2023/956, Annex II).

Can I use EU default values for a precursor?

Yes, where your supplier gives no verified actual data. The default value then carries the year's mark-up: 10% in 2026, 20% in 2027 and 30% from 2028, and 1% for fertilisers. The worksheet adds it and shows the share of your SEE that comes from default values, which the operator's report states.

Which electricity factor applies in India?

The EU default for India, 0.726 tCO2 per MWh (Implementing Regulation (EU) 2025/2621, Annex II), unless an actual factor is allowed: a direct technical link, or a power purchase agreement that meets the conditions of Implementing Regulation (EU) 2025/2547, Annex II D.4.3. Your verifier checks that. The CEA grid factor is not one of the options.

More free tools