CarbonNeeti

Free tool

Scope 2 electricity emissions calculator

Turn the kWh on your electricity bills into Scope 2 emissions, at the CEA grid factor for your fiscal year. No sign-up.

The CEA factor changes every year.

Grid and open access together, as your bills state them. 1 MWh = 1,000 kWh.

Renewable power bought through open access, group captive or a green tariff.

How it works

  • Add up the kWh on the year's bills, grid and open access together.
  • Divide by 1,000 to get MWh.
  • Multiply by CEA's all-India weighted average grid factor for that fiscal year (tCO2 per MWh). That is location-based Scope 2.
  • The location-based figure is never reduced for renewable power. A market-based figure is shown apart, only when you name the instrument (PPA, green tariff, REC or I-REC), say the power is solar, wind or hydro, and confirm it meets the Quality Criteria: those kWh at zero, the rest at the grid factor as an approximation (India publishes no residual mix; a qualifying supplier factor for that power would replace it).

The figure is the one CarbonNeeti stores for the same reading: the same factor table, the same unit conversion and the same rounding (half up, to six decimals). The method follows the GHG Protocol Scope 2 Guidance (2015). A revision of that guidance is under way (consultation summary of 29/07/2026); there is no final text yet, so the 2015 rules apply. Fuels you burn are Scope 1: use the Scope 1 fuel calculator.

The method step by step, with a worked example: read the guide.

Questions

Which grid emission factor should an Indian company use for Scope 2?

The Central Electricity Authority's all-India weighted average for the same fiscal year, from its CO2 Baseline Database. This tool uses the version CarbonNeeti uses in reports and names it under the result.

What is the difference between location-based and market-based Scope 2?

Location-based multiplies all the electricity you used by the grid average. Market-based uses the factor of the power you contracted for, such as renewable power through open access, but only where the contract or certificate meets the GHG Protocol Scope 2 Quality Criteria. The GHG Protocol asks you to report both.

Does renewable power through open access count as zero?

In the market-based figure, the renewable kWh count at zero, the emission factor of wind, solar or hydro generation, if the contract or certificate meets the Quality Criteria. The location-based figure still counts it at the grid average. CCTS has its own rule (BEE Detailed Procedure v1.0 s.5(17)(iii)): renewable energy certificates are no claim there, and renewable power bought through open access, a PPA or a green tariff counts as zero only with its documents and an undertaking against double counting.

What if CEA has not published the factor for my year yet?

The tool uses the latest earlier year and says so. Use the year's own factor in your report once CEA publishes it.

More free tools